This firmware is intended for use with DX5 II only and is not compatible with other models. Flashing this firmware onto a different model will render the product inoperable and irreparable. If your firmware version is already V1.39, there is no need for this upgrade.
Press and hold the knob while powering up (powering up: i.e. switching the power switch on the rear panel to power on).
*The picture is only for reference.
Windows/MacOS: Download here
1. Connect the power cable to the DX5 II and the power outlet.
2. Connect the device's USB interface to a PC/Mac via a usb cable.
3. Turn off the device with the power switch on the back. Press and hold the power button, then power on with the power switch. The screen will show the current software version.
4. A removable drive will show up in the explorer on PC/Mac. Open the drive.
5. Copy the .Topping file to the root directory of the drive. The drive will then eject itself and reconnect.
6. Reopen the drive. A new file will be showing the current firmware version as "Update successful(Version.Vx.xx)" of which the "XX" is the new firmware version that indicates the firmware is successfully upgraded.
7. Turn off and on the device again. The upgrade is complete.
If the computer does not recognize the unit, try using another USB port, another USB cable or even another computer.
Enabled: Setup -> Input Settings -> Input Options -> Auto-detect
Adjustment: C1 and C2 now save all offset parameters for the entire unit
Added: "PEQ Switch" option to the function selection for A/B buttons and knob press
Fixed: Volume not being set to maximum in DAC mode for line output when volume memory is enabled
Fixed: Abnormal display of Bluetooth device names on some Android phones
Fixed: Abnormal FFT display after waking up from standby
Fixed: Several other known bugs